How to Mount Baby Monitor?

How to Mount Baby Monitor

The next question you may have is how to mount a baby monitor. There are many ways to do this, and it’s a relatively simple process. Several popular ways to mount a baby monitor are discussed in this article.

What does it feel like not being able to see or hear your baby? Most parents feel overwhelmed by this feeling. When you’re not in the room, there’s a way for you to keep an eye on your little one. A baby monitor can be installed to accomplish this.

Which types of baby monitors are available?

Audio

You can hear what’s happening in the room where your baby is with an audio baby monitor. So long as it is within the frequency range, it functions as a radio that continuously transmits signals to the receiver.

You can buy stuffed toys or standalone devices that contain audio baby monitors. Unlike the one in the stuffed toy, the one in the stuffed toy can be disguised as an ordinary toy without anyone realizing it. If you’re using the standalone device, you can put it next to the crib so you can adjust it easily.

Audio-video

One of the best baby monitors is one with video and audio capabilities. The room where your baby is can be seen and heard at all times. Other types of baby monitors look like surveillance cameras, while others are stuffed toys. You can view the footage on your phone with some baby monitors that have this feature.

As long as you’re not in the room, both baby monitors are useful because they serve the same purpose; monitoring your baby when you’re not around. Even if we trust a babysitter or a nanny with our little ones, we may still feel uneasy about leaving them. We can feel more at ease leaving our child with a baby monitor.

Baby Monitor Mounting Instructions

Easily mount a baby monitor without making it visible if you want to learn how to do it. The baby monitor can be hidden with a bit of creativity and a few techniques. A baby monitor can be mounted by following these steps.

Understand your baby monitor’s type. Your baby monitor should be placed according to the type you have. As a result, it picks up sound well and takes video well.

Location and angle:

Depending on the angle at which you want the baby monitor to sit, you will need to decide where to install it. It might be a good idea to mount an audio baby monitor at the top corner of your room if you have one.

In this way, the entire room will be covered without missing an angel. The audio baby monitor, however, should be three feet from the crib if you have one. This is enough to pick up the sound of a baby’s cry and the entire room.

Find a disguise:

A stand-alone baby monitor can be hidden almost anywhere if you’re creative. The shelf, the curtain rack, or between the stuffed toys can all be used for this.

Make sure the wiring is in good shape and pay attention to the power source. Ensure that the wiring on your baby monitor is not visible and hard to reach if the monitor’s power source is an outlet. It will also depend on the length of the wire and how you mount a baby monitor with a cord. To keep your baby from playing with it, hide it behind the curtain or tape it to the wall.

What to look for when choosing a baby monitor

Here are some things to consider before purchasing a baby monitor since there are different types to choose from:

Power source:

For their power source, some baby monitors use batteries. There are also some that come with a cord so you can plug them into an outlet. The one you think will be easiest to install is the one you should choose.

Portable receivers:

It’s important that you can move around the house with the baby monitor. With some receivers, you can connect to multiple devices simultaneously so that you can complete your household chores as well. You can also use a mobile application to connect a baby monitor to your phone.

Video and audio quality:

A baby monitor’s camera and audio quality are also important factors to look at when choosing one. In the end, you need a baby monitor so that you can see and hear what’s going on.

Indication of sound by light

The light on your receiver indicates the frequency of the sound. Your baby’s cry is shown here so you can see how loud or soft it is.

Activation of sound:

The baby monitor can also be fitted with a sound activation feature to save energy. When it detects sounds, it sends signals to your receiver

Mount Baby Monitor

Wall Mount:

If you want to keep your baby monitor within reach, a wall mount is ideal. A stand or wall mount are both options. The following steps should be followed:

1. Choosing a location:

The infant optics baby monitor should be mounted on the wall in a convenient location. The outlet should be close to the crib or bed and away from the entire structure.

2. Locate the location:

Measure the location where the mount will be attached using a level. If you don’t have a pencil, you can use a marker.

3. Hole Drilling:

Drilling with a machine. To mount the baby camera on the wall, drill a hole that is the same size as the mounting bracket on the back.

4. Put the Scrws here:

The wall mounting bracket must be screwed into the hole in the wall. Screws should be tightened with a screwdriver.

5. Connect the baby monitor to the video:

The video display can be attached to the mount once the screws are in place. If the wall mounting kit comes with the product, follow its installation instructions.

Mounting in the ceiling:

For a centrally located monitor in your home, a ceiling mount is an excellent choice. If you live in a large house and want to monitor your baby from different locations, it can also be useful. Additionally, it allows you to see a wider area of a room. The following steps should be followed:

1. Ceiling joist location:

Identifying the joists in the ceiling is the first step. Stud finders and flashlights can both be used for looking up.

2. Hole Drilling:

Where you located the joists, drill holes in the ceiling. Make sure the holes are large enough to accommodate the screws or anchors.

3. Assemble the anchors or screws as follows:

Then screw or anchor them in. Tighten them with a screwdriver.

4. Monitor to be hung:

The baby monitor can be hung on the joist once the screws or anchors are in place. Before leaving your child unattended, check that the video monitor is secure.

Crib Mount:

If you want your baby to have easy access to the video monitor, a crib mount is a great option. With its adjustable height, it can be used with a variety of crib sizes. It can also be used as a night light with this mounting method. To follow these steps, follow these steps:

  • If your model requires batteries, remove the battery cover.
  • Disconnect the monitor from the wall and remove the mounting screws.
  • Using a pencil, mark the spots for the screws on the crib where you want the monitor to go.
  • Pilot holes should be drilled at the marks you made on the crib.
  • Make sure the screws are tight.
  • The battery cover needs to be replaced. This is a good time to plug in the power cord, too.

Mounting of electrical plugs:

Keeping the video display close to your baby while not using any cords is possible with an electricity plug mount. For easy storage, the cord wrap is built into the unit. The unit plugs into an outlet. Installing an electricity plug mount is as easy as following these steps:

  • Using the mount, attach the monitor to an outlet and plug the mount into the monitor.
  • The monitor should be turned on.
  • To attach the mount to a wall or other flat surface, position it where you want it and use the adhesive strips attached.
  • Until you are happy with the view, carefully adjust the camera angle on the video display.

Mount on a shelf:

When you want to keep your baby monitor within view but out of reach of your little one, you should consider a shelf mount for it. Mounts of this type are attached to shelves or other flat surfaces and can be rotated. Install a shelf mount by following these steps:

  • Mount the monitor using the included screws on a sturdy shelf or another flat surface that can handle the monitor’s weight.
  • Attach the mount to the monitor by carefully lifting it.
  • Tighten the screws after rotating the monitor to the desired viewing angle.

Mounting at the corner:

You can place a corner mount in a specific area in your home if you want it to be visible from that location. A corner sled can be used to attach it to a corner of a room with 3M Command Strips. AC adapters should not be used with extension cords. Installing a corner mount is as simple as following these steps:

  • Surfaces, where 3M Command Strips will be mounted, should be cleaned.
  • Strip the strip of the adhesive lining.
  • You will need to gently press down on the strip for about 30 seconds against the corner of the room.
  • It is recommended that you wait one hour before using the monitor after the adhesive has set.

Window Mount:

While your baby is sleeping, you can monitor him or her through a window mount. From outside the room, you can see the video display, so you can keep an eye on your child without entering. Mounting a video baby monitor on a window can be done in three steps:

  • To determine if your monitor can be mounted in a window, check its specifications.
  • Make sure the monitor can be viewed in a large window.
  • Make sure the window is clean and completely dry before mounting the baby monitor. Make sure the window is clean and completely dry before mounting the baby monitor.
  • Attach the window to the mount by peeling off the double-face tape backing.
  • Press the baby monitor camera against the adhesive until it is securely attached to the mount.

Mounts on tables:

When you’re cooking or doing other things in another room, a table mount can come in handy. You can rotate this mount to get a different viewing angle by attaching it to the edge of a table or countertop.

You should make sure that your baby can’t kick it off the dresser or begin to play with it when you place it next to the changing pad. Installing a table mount is as simple as following these steps:

  • It is best to place the monitor on a table or counter that is as wide as the monitor.
  • To mount the monitor, drill the same size hole in the tabletop as the mounting bracket.
  • Mount the bracket in the hole by screwing it in place.
  • On the bracket, hang the monitor.

Should baby monitors be placed near cribs?

Many new parents place their baby’s monitor in their crib with the monitor on. Consequently, cords should not be wrapped around crib bars. Make sure your baby monitor is at least three feet away from any side of the crib. You will need an extra six inches on either side of your crib to fit this. Striking cords should not dangle or be loose so that strangulation can occur.

Wireless baby monitors are becoming more popular among families. Strangulation may be avoided with this alternative. The dangers of electromagnetic frequencies to babies’ developing brains remain a source of concern for many parents.

Despite the lack of scientific evidence regarding this issue, some families may find it to be a significant concern.

Several studies have shown that digital wireless baby monitors within three feet of a crib emit nearly the same level of radiation as five hundred feet away from a cell phone tower.

Conclusion

Having a baby monitor in your home is essential if you have hired a nanny to watch over your baby while you are not at home. When you are not able to watch over your baby physically, having a baby monitor installed around the house will give you peace of mind. It is for this reason that learning how to mount baby monitors can alleviate your worries.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *