Infant Optics DXR-8 Proper Antenna
In this blog post, we’ll guide you best ways to fix infant optics DXR-8 Proper Antenna, so you can get the best possible reception.
The Antenna installed in the Infant Optics DXR-8 Video Baby Monitors is highly useful in capturing the signals for sound and audio. These antenna wires play a crucial role in supporting the major functionality of such devices.
However, in some cases, these antenna wires become unable to perform their actions with accuracy. As a result, the DXR-8 baby monitors can not display any image or record any sound for the users.
Here in this article, we will be looking at the 3 best and easy ways to fix these proper antenna problems in these devices. So, make sure to follow each step in the given below headings one by one.
3 Best Fixing Ways – Infant Optics DXR-8 Proper Antenna:
You have dealt with the out-of-coverage signal issues in these technical and portable devices. Well, the faulty antenna is the biggest reason for this error to disintegrate the performing ability of such small baby machines.
Moreover, if you are interested in learning more about the amazing features and versatile functions of these devices, then be sure to check out Infant Optics DXR-8 Video Baby Monitor review article on this website.
1. Antenna wire problem
The biggest problem that usually all DXR-8 users face is their errors in the small current supplying wiring cables. To fix this issue, you have to open the whole casing of such devices until their major circuit board is exposed.
First, remove all the connections and power switches to stop the charge flow in the main motherboard. Now, detect the small wire connections just below the antenna rode and see whether it is damaged or not.
In case the wire is damaged, you have to remove the primary solders and use the main power wires to directly supply the current to the antenna wiring portion. In the end, just connect both of these wires and make a direct charge flowing pathway for accurate current delivery.
Moreover, also make sure to test try these antenna rod functions by accurately fixing all items in their fixed places. We would advise you to use the best material wires that do not melt easily in case you are looking to replace the damaged antenna wired connection.
2. Re-position the antenna
In case you are not facing the problems in the upper heading, you might be looking forward to another technical solution. Well, this one is a simple but effective method for capturing the antenna signals in these devices.
First, make sure that the range of this device and the camera are close enough to support each other’s functionality. To ensure that this portable machine will work for a longer time and be able to handle more work, the battery must also be fully charged.
Secondly, you need to change the positions of the antenna rod of such machines continuously. This would help you greatly in determining the best position where the signals are smooth to allow these DXR-8 machine elements to perform their actions with pace and perfection.
One more tip that we would like to add is to place these devices and their cameras within a close range of fewer than 800 feet. As we have discovered that such machines perform efficiently within the distance range.
3. Signal Interference
The wide-angle lens and large antenna rods support the users greatly in capturing strong signals and creating the best images. However, due to this faulty error, people consider the antenna replacement of such devices.
No doubt, it is an easy step to overcome all your problem-causing situations. But, it is quite expensive and difficult to afford for normal ranged users to get the best and replaced the display and sound feature.
Thus, another main issue that occurs in the DXR-8 monitors only is signal interference. As these devices do their best to capture the other signals like the Wi-Fi and Radio signals which interrupt its functionality to a greater level.
To overcome, such a situation, make sure to place them close to one another and turn off all other technical devices while turning them on. As a result, the signals will be strong, durable, and fast to create high-quality strength-based connections among these devices and their cameras.
The final step is to contact Infant Optics customer service if you are still experiencing antenna signal issues. Don’t be afraid to let them know about all the problems you encounter regardless of how much money you spend.
FAQs:
Only new antennas can be installed to repair the Infant Optics DXR-8 antennas. Since these antennas are not meant to be replaced, it can be complicated to do so. Use your warranty or visit the company’s website to find a replacement monitor
A color screen with night vision, a zooming, tilting, and panning camera, and a sound bar with an LED display to show sound levels. With a range of 700 feet, the monitor is capable of monitoring large areas.
Press the “menu” or “setup” button on your TV’s remote control. Choose a term similar to “channels,” “antenna,” etc. You might also see words such as “scan,” “auto-tune,” “channel search,” “auto-program,” and so on. All you need to do is turn on the TV.
In Conclusion:
Infant Optics DXR-8 proper antenna technical errors are one of the basic problems that the users face with these devices. The major reason for this issue is the faulty wiring of the antenna rods in such machines.
Moreover, signal interference, antenna positions, and corrupt charge supply are some other main error-causing factors. In the upper headings we have provided the best and most effective steps to overcome such problems.
If the antenna wires or rods are faulty, the best course of action is to replace them with new ones. In the absence of professional help, you may damage the motherboard and the battery of your device.
